WTT!!! 1993 Mazda RX-7 for Ram 3500....
#1
WTT!!! 1993 Mazda RX-7 for Ram 3500....
OK, I want to trade my 1993 Dark Green Mica Mazda RX-7, for the 95-02 style 3500 Dodge Dually with a Cummins engine, preferably the HO, with manual transmission.... but what ever I can get my hands on
Some details on my car:
the modifications include:
-Apexi Power-FC (needs to be re-tuned, it busted some IC couplers last time it was on the dyno being tuned... so it is still running a little rich)
-Commander
-Pettit column pod/RE-Amemiya boost guage
-Pettit down pipe
-midpipe
-Blitz Nur-spec cat back
-Apexi intakes
-Blitz FMIC, with 3" pipes
-Removed ABS
-Removed air pump
-Simplified vacume lines
-Removed power steering
-removed AC
-Koyo radiator
-Willwood proportioning valve (with remote cable/handle in car)
-Braille mini battery/metal tray
-R1 strut bar
-Feed engine torque brace
-Spec stage II clutch (kevlar disk)
-ACT X-ACT streetlight flywheel
-New pilot/Throwout bearings
-R1 Bilstein front skocks (springs to I believe all the way around? Car came with them....)
-Greddy pully's
-Bomex Type I aero mirrors.
-Techedge 1.5 unit wideband with display, and new L1H1 sensor.
-B&M Hi-Tek supercooler with spal fan, and earls fittings/braided line from engine.
-Carbon-crap (carbon fiber overlay) fenders, so don't ask why they are differeny color :P
The things the car needs, and needs fixed.... The interior is black and missing the door panels, rear drivers side 1/4 panel, A-pillar covers, and drivers side kick panel, everything else is complete! The paint is new, and has about 3 runs in it.... all are on the doors They can be dulled/wet sanded out.
The car ran a 12.719 at 113.1 at Jackson, could easily be doing a 12.5 with slicks, and a better launch!
Some details on my car:
the modifications include:
-Apexi Power-FC (needs to be re-tuned, it busted some IC couplers last time it was on the dyno being tuned... so it is still running a little rich)
-Commander
-Pettit column pod/RE-Amemiya boost guage
-Pettit down pipe
-midpipe
-Blitz Nur-spec cat back
-Apexi intakes
-Blitz FMIC, with 3" pipes
-Removed ABS
-Removed air pump
-Simplified vacume lines
-Removed power steering
-removed AC
-Koyo radiator
-Willwood proportioning valve (with remote cable/handle in car)
-Braille mini battery/metal tray
-R1 strut bar
-Feed engine torque brace
-Spec stage II clutch (kevlar disk)
-ACT X-ACT streetlight flywheel
-New pilot/Throwout bearings
-R1 Bilstein front skocks (springs to I believe all the way around? Car came with them....)
-Greddy pully's
-Bomex Type I aero mirrors.
-Techedge 1.5 unit wideband with display, and new L1H1 sensor.
-B&M Hi-Tek supercooler with spal fan, and earls fittings/braided line from engine.
-Carbon-crap (carbon fiber overlay) fenders, so don't ask why they are differeny color :P
The things the car needs, and needs fixed.... The interior is black and missing the door panels, rear drivers side 1/4 panel, A-pillar covers, and drivers side kick panel, everything else is complete! The paint is new, and has about 3 runs in it.... all are on the doors They can be dulled/wet sanded out.
The car ran a 12.719 at 113.1 at Jackson, could easily be doing a 12.5 with slicks, and a better launch!
#3
RE: WTT!!! 1993 Mazda RX-7 for Ram 3500....
And the last pictures:
And the truck must be in "good" condition, with LESS than 150,000 miles... Seems like most of them that I find have 300,000 miles on them.... Which is great to know it might run that long, but I'm sure the life is running out at that point
And the truck must be in "good" condition, with LESS than 150,000 miles... Seems like most of them that I find have 300,000 miles on them.... Which is great to know it might run that long, but I'm sure the life is running out at that point
#6
RE: WTT!!! 1993 Mazda RX-7 for Ram 3500....
No they don't, there are two that I will be looking at today, on regular cab with a 5 speed (not sure if its the 24 valve or not) for $12,500 (1999 with 126,000 miles), and another extended cab, with a 12 valve and automatic for $10,900 (1997, with 136,000 miles)
I just don't think anyone on here has one [:'(]
I just don't think anyone on here has one [:'(]
#7
RE: WTT!!! 1993 Mazda RX-7 for Ram 3500....
well around my area your chance of finding any diesel truck for that low is a needle in a haystsck every truck with any desiel motor is going for like 18000 and more.
Trending Topics
#8
RE: WTT!!! 1993 Mazda RX-7 for Ram 3500....