Engine parts for 5.2/5.9L Magnum Engines
Thread Starter
|
Champion
Joined: Jun 2012
Posts: 3,096
Likes: 2
From: Iowa
Engine parts for 5.2/5.9L Magnum Engines
All parts have been used but have less than 200mi. on them unless otherwise noted.
Cylinder Heads
Guy who sold them to me told me the following: They are HD heads, intended mainly for towing. They have the stronger casting, and have been ported slightly on the intake side and more on the exhaust side (My note: side by side to my OEM heads they looked a little larger). He also said they have HD springs and hardened valves and a polished bowl.
My note: The heads have some carbon on them as my engine was running rich, however it will clean right off with some solvent. Pushrods are brand new, rockers are OEM but not bent or worn. Includes rocker bolts. Note that you must have brand new pushrods with these heads, that's why the pushrods are new. Napa told me these are HD pushrods, made by Federal Mogul. The heads and pushrods MUST go together as a set.
Valve springs up close
Valve covers (COVERS SOLD) and injector rail with OEM injectors (RAIL AND INJECTORS SOLD)
I painted the covers, they have a little dust from sitting around my shop for awhile. Covers and injector rail/injectors all have 148K on them.
Water pump with severe duty fan clutch and fan (will need new gasket) (NO LONGER AVAILABLE)
Does not include radiator hose or bypass hose.
Front side:
Back side:
Modified Plenum with plenum fix
Kegger intake, runners are cut back (Power band will sit between 2250 and 3500RPM), it has the eBay plenum pan and FelPro plenum pan gasket. Comes with new non-TTY intake-to-head bolts.
Plenum has no oil pooling in it, the oil you see is the normal amount from the PCV valve.
All parts can be picked up locally or I can ship.
Heads are $500 OBO
I have most all of the brand new sensors from a 1996 Dodge Ram 1500 5.9L Magnum as well, make offers. I have not posted pics here but will if you are interested. Also I have some misc. parts such as lights etc. that I am not listing in detail here.
Shipping is in addition to part costs, unless picked up locally (SE Iowa).
If you want more pics of parts, let me know and I'll post them here.
Cylinder Heads
Guy who sold them to me told me the following: They are HD heads, intended mainly for towing. They have the stronger casting, and have been ported slightly on the intake side and more on the exhaust side (My note: side by side to my OEM heads they looked a little larger). He also said they have HD springs and hardened valves and a polished bowl.
My note: The heads have some carbon on them as my engine was running rich, however it will clean right off with some solvent. Pushrods are brand new, rockers are OEM but not bent or worn. Includes rocker bolts. Note that you must have brand new pushrods with these heads, that's why the pushrods are new. Napa told me these are HD pushrods, made by Federal Mogul. The heads and pushrods MUST go together as a set.
Valve springs up close
Valve covers (COVERS SOLD) and injector rail with OEM injectors (RAIL AND INJECTORS SOLD)
I painted the covers, they have a little dust from sitting around my shop for awhile. Covers and injector rail/injectors all have 148K on them.
Water pump with severe duty fan clutch and fan (will need new gasket) (NO LONGER AVAILABLE)
Does not include radiator hose or bypass hose.
Front side:
Back side:
Modified Plenum with plenum fix
Kegger intake, runners are cut back (Power band will sit between 2250 and 3500RPM), it has the eBay plenum pan and FelPro plenum pan gasket. Comes with new non-TTY intake-to-head bolts.
Plenum has no oil pooling in it, the oil you see is the normal amount from the PCV valve.
All parts can be picked up locally or I can ship.
Heads are $500 OBO
I have most all of the brand new sensors from a 1996 Dodge Ram 1500 5.9L Magnum as well, make offers. I have not posted pics here but will if you are interested. Also I have some misc. parts such as lights etc. that I am not listing in detail here.
Shipping is in addition to part costs, unless picked up locally (SE Iowa).
If you want more pics of parts, let me know and I'll post them here.
Last edited by aofarrell2; Sep 3, 2013 at 10:51 PM.
Thread Starter
|
Champion
Joined: Jun 2012
Posts: 3,096
Likes: 2
From: Iowa
Also I am willing to talk price on any parts... I also have a Magnum 5.9L 360 block that needs rebuilt. I'll make a package deal if you want to buy the block and above parts. I also have most of the hardware for the engine and all of the above parts.
Record Breaker
Joined: Mar 2013
Posts: 1,130
Likes: 15
From: Somewhere in Kentucky
I bought the plenum, came in, looked good, installed it without issue!
