Audio/Visual Electronics Wired up? Everyone's got some sort of electrical modification. Let's hear about it here.

no sound, new amp

Thread Tools
 
Search this Thread
 
  #11  
Old 06-22-2007, 06:27 PM
Captain Pioneer's Avatar
Captain Pioneer
Captain Pioneer is offline
Professional
Join Date: Jun 2007
Posts: 107
Likes: 0
Received 2 Likes on 2 Posts
Default RE: no sound, new amp

yea im a bit unsure of what u mean? But i just thought about something... if its an aftermarket HU... and u have the RCA's connected into the back... did u make sure on ur HU that it has those pre-outs selected and turned on? because if you dont most likely u will not get anything going to that Amp... Its the same deal with an Amp for a Sub...
 
  #12  
Old 06-23-2007, 01:55 PM
batman13's Avatar
batman13
batman13 is offline
Grand Champion
Thread Starter
Join Date: Feb 2006
Location: N.Ridgeville, OH
Posts: 5,597
Likes: 0
Received 0 Likes on 0 Posts
Default RE: no sound, new amp

the amp is hooked up with RCA
the speakers are directly hooked to the HU
the amp and the sub work great but thats it, no speakers from the HU

P.S What is a good price for dynamat?
I might as well do that while most of my interior is apart
 
  #13  
Old 06-23-2007, 06:02 PM
rtkota5point9's Avatar
rtkota5point9
rtkota5point9 is offline
All Star
Join Date: Nov 2006
Location:
Posts: 892
Likes: 0
Received 0 Likes on 0 Posts
Default RE: no sound, new amp

Ok so what did you unhook that made them start working? The RCA's? If so, there may be a short in them or it's grounded somehow. Could even be the amp. Try this: Unplug the RCA's from the AMP with them still plugged into the headunit. If the sound still cuts out, then it sounds like it's a bad cord, or you have a screw through it or something. If it starts working when you do that, then something is messed up inside the amp and it's grounding out the RCA's or somthing.
 
  #14  
Old 06-25-2007, 12:21 PM
Captain Pioneer's Avatar
Captain Pioneer
Captain Pioneer is offline
Professional
Join Date: Jun 2007
Posts: 107
Likes: 0
Received 2 Likes on 2 Posts
Default RE: no sound, new amp

Check the wires ur best bet is to take a speaker out and take out the head unit and wire the speaker directly from the HU wireing harness to the speaker and see if it works. If it does then its ur speaker wires, if not its ur HU and the line output for the speakers could be blown
 
  #15  
Old 06-27-2007, 09:27 PM
batman13's Avatar
batman13
batman13 is offline
Grand Champion
Thread Starter
Join Date: Feb 2006
Location: N.Ridgeville, OH
Posts: 5,597
Likes: 0
Received 0 Likes on 0 Posts
Default RE: no sound, new amp

I've tried unhooking the RCA with no avail, i haven't pulled the speaker and HU yet but i'll try this weekend
 



Quick Reply: no sound, new amp



All times are GMT -4. The time now is 07:16 AM.