I'm installing an Eclipse AVN5500 and was wondering if somebody could tell me where the VSS hook up is for the truck.

Thanks in advance.

Justin

I have the CH2-CRY, CAN2.

 

I do not know off-hand, but I have asked a friend of mine who works in a Dodge dealer repair section. When I hear back, I'll post here...

 

It is Dark Green/Brown at PCM on passenger side firewall.

 

Try looking here: http://www.dodge.com/bodybuilder/2008/dr/drmo.pdf
From what I read for my truck (07), WBattack is right. It is the dark green/brown stripe wire in the 4th connector at the PCM. Should be pin 32. I am using this wire to connect an MPGuino FE computer. I have heard sometimes the bodybuilder diagrams are a bit off or incomplete. I think I looked at the wrong wire, or had bad lighting as I THOUGHT I had the DG/brn wire. There is also a DG/orange wire at pin 33 in the same connector...
Here is a link to 12volt where they were asking the same questions about an 04. http://www.the12volt.com/installbay/...63939&get=last
You can also take a look at Rostra's cruise control pages: http://www.rostra.com/pdf/Form4428.pdf
Hope this helps.

 

WBattack has it correct

http://www.the12volt.com/installbay/...~114758#556188

Dark Green/Brown at PCM on passenger side firewall.