When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
You have to take the hole dash peice off that goes around the radio and the gauges and ever thing. It should just pop off theres just lil pins holding it. the wires should be labeled right on the wire in tiny writing?
If its anything like my 2001 dak, then all you have to do is remove the lower dash piece. There are 3 screws holid it in than it just pulls out. The main dash board has 2 screws above the gauges, remove these and pull. disconnect all the wires and lift it out. That should be it. I have done it 3-4 times in my truck and its fairly easy. GOOD LUCK