I hope this is where it goes. I have an 86' dodge ram 50 pick-up and im going to install a CD player in it. When i went to take out the old radio that the previous owner had in it, most of the harness wires were not used. This was odd to me as to the radio worked perfect. I have a sony xplode player and as i was "trying" to install it, some wires were not clear, some just dangled there, some off colors, and i couldnt find where to hook anything up to. Can anyone help me please? I have pics if those will help you any. The only wires i need to hook up are the YELLOW(constant power) RED(ingnition) and BLUE(Intenna). I have no idea where these connect as there are no wires for them. All help is appreciated.

Thank You

 

1986 Dodge Ram 50 Stereo Information

Constant 12V+ Blue/Black
Switched 12V+ Blue/White
Ground n/a
Illumination Red/Yellow
Dimmer Black/Yellow
Antenna Right Front
Front Speakers 5 1/4" Doors
Left Front (+) n/a
Left Front (-) n/a
Right Front (+) n/a
Right Front (-) n/a
Rear Speakers 4" Side Panels
Left Rear (+) n/a
Left Rear (-) n/a
Right Rear (+) n/a
Right Rear (-) n/a


If you said the color is off them, you want to take a volt meter to them.

 

Thanks a Bunch! Looks like im just going to have to rewire everything. Its a set-back but I need to get it going.

thanks again
Jordan