I am looking for a back windshield out of a 69 Roadrunner, Satellite, Belvedere or GTX 2-dr hardtop and also the retainer clips to hold the outside windshield trim on. Thanks in advance.

 

I may have one.Where are you located?

 

The trim clips should be common to most "vintage" mopars (there is a tool that you use to release the clips). I just bought a few to replace a couple on my Charger that were rusted beyond usefulness. I got them at the local auto body/paint supply shop. If you have difficulty locating them, perhaps I can take a picture of one to make sure we are referring to the same clip.

 

I have tried all the glass shops and body shops in the area and can't find them, closest is 84 Dodge K car. Guess I'll have order em from Year one or some place. Thanks.

 

I took a couple pictures of the clips on my Charger but they did not come out well, however I also have a couple clips left over from replacing a couple on the same Charger. Do your clips look something like this?


[IMG]local://upfiles/33752/0A6B18E1FD4848BDB9EB41F51DA5EB50.jpg[/IMG]

 

bdering, those are pretty close, I will try and get some piscs of mine tomorrow with the digital camera and post them. Mine have a solid piece in the center for the screw and straight edges on the outside. Thanks for the reply.

 

Hi gtxpooch,

Actually, mine have a rivet of sorts (looks like a small nail head) that the clip slides onto. I think you could use a very small screw as well. But, if you post a sample picture of yours, perhaps I can locate them for you. After working in a parts store for 6 years, I can locate some parts and they may be available to you locally.

Hope that helps.

 

mine have screws here's a pic,[IMG] [/IMG] sorry about the size

 

How many of these do you need?

[IMG]local://upfiles/33752/1790067ED9374AD2882F8B095C962476.jpg[/IMG]

 

PM on the way, mine have phillips screws. thanks!