66 Coronet Wide Block 318 Questions???...
Joined: Jan 2007
Posts: 22
Likes: 0
From: Kansas City, MO
RE: 66 Coronet Wide Block 318 Questions???...
Welcome to the wonderful world of the Poly!
Your best bet is a Weiand 7503 4-bbl intake, which they stopped manufacturing after Holley bought 'em. Also, no heads will interchange except those off of another 318 Poly. For more info on hot rodding them, as well as links to parts, etc, you may want to check out the pages I linked to on my first post:
https://dodgeforum.com/m_678492/tm.htm
Those pages have an interchange guide I wrote, as well as the most updated business directory with POly parts places you'll find anywhere online!
Keep the Poly - you'll be glad you did. You'd have to make a 360 stroker to get the kind of torque it'll put out stock!
~Jason
Your best bet is a Weiand 7503 4-bbl intake, which they stopped manufacturing after Holley bought 'em. Also, no heads will interchange except those off of another 318 Poly. For more info on hot rodding them, as well as links to parts, etc, you may want to check out the pages I linked to on my first post:
https://dodgeforum.com/m_678492/tm.htm
Those pages have an interchange guide I wrote, as well as the most updated business directory with POly parts places you'll find anywhere online!
Keep the Poly - you'll be glad you did. You'd have to make a 360 stroker to get the kind of torque it'll put out stock!
~Jason
ORIGINAL: 04RamSLT
ok i found a 66 or 67 Coronet 500 with a 318 Wide Block (90) Degree with a 2BBL carb not quite sure yet on year only thing wrong is drivers door and front fender are beat up but have another full parts car w/o glass but everything else is there with door and fender
but i think the engines gona smack me in the face but will a 4 barrel intake manifold off of a 318 60 degree block work on the 318 90 degree wide block. it has the stock motor/tranny/carb and such want to put a 4 barrel on the car and if its possible to take 360 heads on it or if their not interchangeable so that it will flow more air/gas with the 4 barrel...........if anyone has any links to engine parts for this car please post them. otherwise besides maybe a heads/carb/intake swap i want to keep it all original not factory specs on paints and interior colors but relatively stock motor just with lil more get go
so if anyone has a little bit more info on this style engine and whats interchangeable off other 318s / 360s please post thanks all
ok i found a 66 or 67 Coronet 500 with a 318 Wide Block (90) Degree with a 2BBL carb not quite sure yet on year only thing wrong is drivers door and front fender are beat up but have another full parts car w/o glass but everything else is there with door and fender
but i think the engines gona smack me in the face but will a 4 barrel intake manifold off of a 318 60 degree block work on the 318 90 degree wide block. it has the stock motor/tranny/carb and such want to put a 4 barrel on the car and if its possible to take 360 heads on it or if their not interchangeable so that it will flow more air/gas with the 4 barrel...........if anyone has any links to engine parts for this car please post them. otherwise besides maybe a heads/carb/intake swap i want to keep it all original not factory specs on paints and interior colors but relatively stock motor just with lil more get go
so if anyone has a little bit more info on this style engine and whats interchangeable off other 318s / 360s please post thanks all
Joined: Jan 2007
Posts: 22
Likes: 0
From: Kansas City, MO
RE: 66 Coronet Wide Block 318 Questions???...
This says it all, my friend:
http://www.diamondbackengines.com/fo...php?topic=47.0
~Jason
http://www.diamondbackengines.com/fo...php?topic=47.0
~Jason
ORIGINAL: 04RamSLT
whats so special about the wideblock 318?
whats so special about the wideblock 318?
