1994 Dodge Caravan won't idle in reverse
#1
1994 Dodge Caravan won't idle in reverse
Hi:
I have a 1994 Dodge Caravan 3 speed automatic that wants to die when put into reverse gear. Forward gears seem to work fine - maybe shifts a little later than normal, but when I put it into reverse, it goes into gear instantly and if I apply the brake with it in reverse it will die - like it's engaging too much. Also, the accelerator pedal gets hard when I put it into reverse. Any ideas?
I have a 1994 Dodge Caravan 3 speed automatic that wants to die when put into reverse gear. Forward gears seem to work fine - maybe shifts a little later than normal, but when I put it into reverse, it goes into gear instantly and if I apply the brake with it in reverse it will die - like it's engaging too much. Also, the accelerator pedal gets hard when I put it into reverse. Any ideas?
#3
Now it won't upshift in forward gears - has 1st gear functioning normally. Oil is nice and pink. Put a pressure gauge on the line tap and there is 52 - 75# in P,N,D,2, and 1. Usually 75# in P when I first start it up - sometimes drops to 52# when I put it in one of the forward gears. Reads 0 pressure in Reverse.
With the gauge on the low/reverse tap: P - 0#, R - about 260#, N - 0#, D - 0#, 2 - 0#, 1 - about 65#.
All readings taken at idle.
It does act like the converter is locked up in reverse. Makes no difference to unplug the TCC solenoid...
Linkage seems fine.
With the gauge on the low/reverse tap: P - 0#, R - about 260#, N - 0#, D - 0#, 2 - 0#, 1 - about 65#.
All readings taken at idle.
It does act like the converter is locked up in reverse. Makes no difference to unplug the TCC solenoid...
Linkage seems fine.
Last edited by swampyMN; 06-06-2009 at 01:19 PM.
#4
Update:
I adjusted the throttle valve linkage and now the transmission upshifts at the proper speeds, but occasionally won't downshift into 1st. That's what the problem with reverse was - it was actually stuck in 2nd gear, and when I shifted into reverse it would die.
It will go into 1st properly every time when I manually shift it into 1st, but not always in D.
Governor sticking a little?
I adjusted the throttle valve linkage and now the transmission upshifts at the proper speeds, but occasionally won't downshift into 1st. That's what the problem with reverse was - it was actually stuck in 2nd gear, and when I shifted into reverse it would die.
It will go into 1st properly every time when I manually shift it into 1st, but not always in D.
Governor sticking a little?
#7
Join Date: Apr 2007
Location: Near Sacramento,ca
Posts: 11,545
Likes: 0
Received 92 Likes
on
78 Posts
Trending Topics
#8