hey cdnjan i replaced my pass side and i saw the video on you tube, it kinda easy, as far as the nuts, if you can get a flat screw driver to wedge between the nut and hold it while using a the ratchet, your good to go, then drill out the rivets, the only thing is twisting and turning to get the tracks out and back in, do one side at a time. and use some wood when you loosen the nuts from the bracket that holds the window, if u can find a harbor freight they sell these suction cup things that you can clamp onto the window to keep it from sliding down in stead of tape, their cheap also, i bought 4 of them 2 on each side of the window. watch the video real good. the whole set up should about $80.00 the doorman brand..