[4th Gen : 01-07]: No start or spark

Reply Subscribe

Thread Tools

Search this Thread

Dec 15, 2015 | 05:20 PM

caravan2003

Thread Starter

Registered User

Joined: Dec 2015

Posts: 24

Likes: 0

From: elkton md

No start or spark

I have a 2003 dodge caravan with a 3.3. I pulled the motor and put a crank kit and new timing chain. After putting the motor back in, it won't start. I removed one plug and only fires when not cranking.

Dec 15, 2015 | 07:21 PM

caravan2003

Thread Starter

Registered User

Joined: Dec 2015

Posts: 24

Likes: 0

From: elkton md

Any thoughts where to start to check?

Dec 15, 2015 | 07:33 PM

caravan2003

Thread Starter

Registered User

Joined: Dec 2015

Posts: 24

Likes: 0

From: elkton md

I'm thinking crank sensor, does anyone know if the flywheel has a bolt pattern or does it go in any pattern

Dec 16, 2015 | 04:14 PM

caravan2003

Thread Starter

Registered User

Joined: Dec 2015

Posts: 24

Likes: 0

From: elkton md

Any comments or suggestions would be appreciated, or just let me know someone is out there!

Dec 17, 2015 | 07:22 AM

caravan2003

Thread Starter

Registered User

Joined: Dec 2015

Posts: 24

Likes: 0

From: elkton md

Ok, since no one will reply or help I guess I'll have to figure it out on my own! Thank's for all the help and replies!

Dec 18, 2015 | 07:08 AM

smokesxt

Record Breaker

Joined: Aug 2009

Posts: 1,111

Likes: 8

From: poynette WI

Seeings you pulled the motor to change the chain, I would start by going back through and making sure you have everything plugged in as it should be.

Dec 18, 2015 | 12:01 PM

caravan2003

Thread Starter

Registered User

Joined: Dec 2015

Posts: 24

Likes: 0

From: elkton md

That's what I did first, I'm thinking because the chain and gears were changed I have to pull the cam sensor and put the cardboard spacer on it. Thank you for the reply.

[4th Gen : 01-07]: No start or spark

[4th Gen : 01-07]: No start or spark

Trending Topics