Dodge Charger The Dodge Charger. The car that made its competitors shiver in the 60's is reborn in 2006 into a sleek sedan that can still send the competition home wimpering, the Dodge Charger.
Sponsored by:
Sponsored by: CARiD

VIN needed for 2006 SRT8 6.1 Hemi

Thread Tools
 
Search this Thread
 
Old Oct 22, 2009 | 10:00 PM
  #1  
franklcpa's Avatar
franklcpa
Thread Starter
|
Registered User
Joined: Oct 2009
Posts: 2
Likes: 0
From: Ocean Springs, MS
Default VIN needed for 2006 SRT8 6.1 Hemi

I have purchased a 2006 6.1 Hemi with NAG 1 transmission off of Ebay. The seller is either unable or unwilling to provide me with the VIN of the 2006 SRT8 Charger that the engine was in when it was wrecked. I have been told that the VIN is not on the engine by a mechanic at the local dealership and told that it is by Chrysler customer service. I have located the following numbers, TNXE6166620143 which is on the block casting. I have also located the numbers that are on the attached transmission label.jpg file. These numbers are as follows, TI2TJ172660328 with a larger 662 below and to the right of the bar code and then P52108662AA on the lower part of the label. Also enscribed in the transmission is 617123:53. My question is exactly what are these numbers and is the VIN anywhere on the engine or transmission.

Thanks for any help that you can pass my way!!!
 
Attached Thumbnails VIN needed for 2006 SRT8 6.1 Hemi-transmission-label.jpg  
Reply
Old Oct 23, 2009 | 07:22 AM
  #2  
MangoInTX's Avatar
MangoInTX
Charger Moderator
Joined: Apr 2006
Posts: 3,109
Likes: 0
From: Allen TX
Default

Welcome to the forum franklcpa.

There is a coalition between the VIN and the Engine Block; the last 8 characters of your VIN is etched at the back of the block, just behind cyl 7. That would be on the driver’s side @ the rear. I have no idea about the transmission.
 

Last edited by MangoInTX; Oct 23, 2009 at 07:27 AM.
Reply
Old Oct 23, 2009 | 08:10 AM
  #3  
franklcpa's Avatar
franklcpa
Thread Starter
|
Registered User
Joined: Oct 2009
Posts: 2
Likes: 0
From: Ocean Springs, MS
Default

Thanks for your help. I will check it out.
 
Reply




All times are GMT -4. The time now is 09:13 PM.