DIRECTIONS FOR FRONT FACIAL REMOVAL
Thread Starter
|
Captain
Joined: Jun 2006
Posts: 598
Likes: 0
From: queens nyc
DIRECTIONS FOR FRONT FACIAL REMOVAL
HI THERE IM LOOKING FOR DIRECTIONS ON HOW TO REMOVE THE FRONT OF THE CAR TO INSTALL THE COOLERS.MANGO WOULD PROPABLY DO IT WELL SINCE HE DID REMOVER IT FOR THE CAM INSTALL .THANKS IN ADVANCE ...................IT DOESNT LOOK TO HARD BUT ID LIKE TO GET SOME DETAILED INFO FIRST
Charger Moderator
Joined: Apr 2006
Posts: 3,109
Likes: 0
From: Allen TX
RE: DIRECTIONS FOR FRONT FACIAL REMOVAL
Check this link out, getting close to a final draft of that cam install. The fascia removal is there.
Also here's another with great pics I found on... of all places DodgeForum.com... LOL It looks like it's written for a Magie but it's damn close to the Charger.
<edit> Your right, it isn't that hard. Snipping the plastic rivits off the lip of the fenderwell was the hardest part. Set aside 30-40 minutes to pull it off. Maybe 15 to put it back on. Be sure to get new plastic rivets to replace the ones you snip off (6 total, 3 on each side).
Also here's another with great pics I found on... of all places DodgeForum.com... LOL It looks like it's written for a Magie but it's damn close to the Charger.
<edit> Your right, it isn't that hard. Snipping the plastic rivits off the lip of the fenderwell was the hardest part. Set aside 30-40 minutes to pull it off. Maybe 15 to put it back on. Be sure to get new plastic rivets to replace the ones you snip off (6 total, 3 on each side).