As a few of you know I am pretty new on here. Sorry if some of my questions are rather dumb.


BUt..................How in the hell you get the back seats to fold down? I dont have the split seats so I dont see a thing to pull to realease a latch. Help.................

I was going to install my amps on the back of those seats.

 

Are you sure you don`t have spit seats? There should be a loop that you can pull it down, usually its on the outside edge of the seat.

Scott

 

I haven't hear of one without. Anyhew, here's where my loops are.

<edit> top is passanger, bottom is driver side. For reference the stiching you see is on the headrest in both pics.


[IMG]local://upfiles/33009/85C143CBDB3043E59F540D2F3C062C24.jpg[/IMG]

[IMG]local://upfiles/33009/AC0C4C9A203A43848E36BEA3008CC7D5.jpg[/IMG]

 

its all one piece. its not split or nuttin. I didnt see any loops though.

 

Interesting, the loops weren’t tucked into the crease between the cushioning.

I’ll get a pic from the trunk this evening, there’s got to be a visible split there.

 

I think only the split 60/40 seats fold. Do you have a Charger SE?

 

Mines like a60/40 split, do they make non split back seats?

 

Maybe since his charger has the small v6 in it that model does not offer a split. I beleive he once asked about ad on's for the smaller v6 in his first posting.

 

The easiest way to tell if it's split is to open the trunk and look at the back of the seats, see pic.

[IMG]local://upfiles/33009/948E1517AE974D64B0F5D44ADB90587B.jpg[/IMG]

 

I have them in mine