Here's the info on getting rid of the rats nest of wires.

Remove small wire organizer clips (3 clips that bundle 4 wires each on each side).

Remove the large wire organizer clips (2 clips – one per side that bundle 8 wires). Separate the top wire organizer from the bottom.

Unplug the wires that go into the coil pack on top of each cylinder.

Pull back the wires from the top of the engine, you should end up with 4 wires on each side of the engine.

One at a time, unplug a disconnected wire and replace w/a short one. Plug the other end of that wire into the coil pack that it is directly beside.

Taylor makes wires that you can get. Here is an e-bay search

 

Thanks, Mango. Really appreciate the info! and the help.

dave