When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
My brother has a 66 Dodge camper special.He recently rebuilt the engine and was told he needed a torq sequince for the lifters.I myself never knew you had a sequince but if there is one,could someone let me know what it is?
which engine? i am going to guess a 318 which is the scallop valve cover, ie the last year, but still a good engine. it is a mechanical lifter, so the lash adjuster has to be backed off, before running the bolts down. best to talk to a mechanical lifter expert. NOT ME.
My brother has a 66 Dodge camper special.He recently rebuilt the engine and was told he needed a torq sequince for the lifters.I myself never knew you had a sequince but if there is one,could someone let me know what it is?
Don't know of a torque for the lifters but there is for the rocker shaft bolts.
With valve clearance screw backed off just run the bolts down evenly a little at a time.
After all are down solidly torque from the center out.