P0113 Code
Thread Starter
|
Registered User
Joined: Dec 2017
Posts: 1
Likes: 0
P0113 Code
Hey guys I have a 2015 dart and I have been having trouble with it wanting to stall out on me. The code P0113 keeps showing so I just replaced the Intake air temperature sensor, but the car is still acting the same and code is still there. Need some advise on what this could be.
Did you clear the code after replacing the IAT? No warranty left?
A code P0113 may mean that one or more of the following has happened: Internally failed IAT sensor
Faulty connection at IAT sensor
Open in IAT ground circuit or signal circuit
Short to voltage in IAT signal circuit or reference circuit
IAT harness and/or wiring routed too close to high-voltage wiring (e.g. alternator, spark plug cables, etc.) Faulty PCM (less likely but not impossible
So if you replaced the sensor and the code did not clear, start checking connections and wiring.
A code P0113 may mean that one or more of the following has happened: Internally failed IAT sensor
Faulty connection at IAT sensor
Open in IAT ground circuit or signal circuit
Short to voltage in IAT signal circuit or reference circuit
IAT harness and/or wiring routed too close to high-voltage wiring (e.g. alternator, spark plug cables, etc.) Faulty PCM (less likely but not impossible
So if you replaced the sensor and the code did not clear, start checking connections and wiring.
Last edited by jkeaton; Dec 24, 2017 at 11:52 AM.
You need to fix whatever is causing the code and then use a code reader to clear the code.