4th Gen Ram Tech 2009 - 2018 Rams and the 2019 Ram Classic: This section is for TECHNICAL discussions only, that involve the 2009 - 2018 Rams and the 2019 Ram Classic. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

HELP Please! Radio pin out diagram needed!!

Thread Tools
 
Search this Thread
 
Old Oct 21, 2009 | 03:32 PM
  #1  
milkman1371's Avatar
milkman1371
Thread Starter
|
Professional
Joined: Sep 2009
Posts: 138
Likes: 0
Default HELP Please! Radio pin out diagram needed!!

I need the radio color code/pin out diagram for the C2 (grey) connector on the back of the radio on our new Rams

The dealer installed the factory camera yesterday and installed the Camera wires in the wrong connector but later realized that the were supposed to go into the White C3 connector.

They left three wires out of the C2 Connector by accident. I noticed this while I was installing my All-Gig today. It is staying apart in the driveway until I get the wires back in. I know they are supposed to be plugged in because I read the instructions myself today and the grey connector is supposed to be left alone...

idiots.... I am wondering if this is effecting my ipod not working??

anyway, slots 3, 4 and 5 are empty and I have three wires available to go in them. A purple, yellow and red wire.

PLEASE HELP ASAP!!
 
Attached Thumbnails HELP Please! Radio pin out diagram needed!!-downsized_1021091519.jpg  

Last edited by milkman1371; Oct 21, 2009 at 03:58 PM. Reason: added pic
Reply
Old Oct 21, 2009 | 04:15 PM
  #2  
Secret Agent Man's Avatar
Secret Agent Man
Captain
Joined: Jan 2009
Posts: 505
Likes: 0
From: Dayton, OH suburbs
Default

From the installation instructions of the backup Camera
 

Last edited by Secret Agent Man; Oct 26, 2009 at 10:51 PM.
Reply
Old Oct 21, 2009 | 04:22 PM
  #3  
Secret Agent Man's Avatar
Secret Agent Man
Captain
Joined: Jan 2009
Posts: 505
Likes: 0
From: Dayton, OH suburbs
Default

More wiring info:

https://dodgeforum.com/forum/2008-do...-for-ipod.html

Post 3 looks to have some good wiring info. Its form the Nitro forum, but hopefully Chrysler used common wire colors across vehicle platforms...
 
Reply
Old Oct 21, 2009 | 04:33 PM
  #4  
milkman1371's Avatar
milkman1371
Thread Starter
|
Professional
Joined: Sep 2009
Posts: 138
Likes: 0
Default

Thanks but no go on that info.

That plug that is in my pic is actually the IPod harness. what you guys gave me is the female end on the radio.

I need to know where those wires go back into the plug. the C2 Connector where the ipod goes into leaves 3, 4 and 5 blank from the factory. But when you put the Ipod cable in there are wires on the harness that goe into those slots..

anyone have a harness around that can look at it or possibly tell me which color wires go into those slots...

TIA
 
Reply
Old Oct 21, 2009 | 04:54 PM
  #5  
ran jr's Avatar
ran jr
Veteran
Joined: Oct 2005
Posts: 461
Likes: 0
From: NW Arkansas
Default

http://www.mofv.com/mygig/MyGIGPinouts.htm
 
Reply
Old Oct 21, 2009 | 08:54 PM
  #6  
Brummo's Avatar
Brummo
Captain
Joined: Mar 2008
Posts: 609
Likes: 0
From: Cedar Rapids, Ia
Default

Damn, should have read this sooner, jsut put my Allgig in tonight and had everything apart.
 
Reply
Old Oct 22, 2009 | 12:27 AM
  #7  
milkman1371's Avatar
milkman1371
Thread Starter
|
Professional
Joined: Sep 2009
Posts: 138
Likes: 0
Default

I have to go to the dealer tomorrow for a service appointment....

BOY am I gonna complain. I called an internet store who had the adapter and told me where the wires go...

IPOD is working now. I am so mad.. The installer left those wire EXPOSED.

I originally wasn't that mad but the more I stewed I got mad. It could have short something..caught fire.. who knows..

I know he was frustrated but the dealer should be better than that.

It may not get me anywhere and I have nothing to accomplish other complaining about all the time I spent last night converting 600 songs to MP3 thinking I was going to HAVE to use USB music instead of iPod..

Plus my time of working on the truck... I just want to have a nice conversation with the Service Manager.
 
Reply




All times are GMT -4. The time now is 02:40 AM.