4th Gen Ram Tech 2009 - 2018 Rams and the 2019 Ram Classic: This section is for TECHNICAL discussions only, that involve the 2009 - 2018 Rams and the 2019 Ram Classic. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

High mount third brake light harness

Thread Tools
 
Search this Thread
 
Old Aug 12, 2013 | 10:33 PM
  #1  
neveuxpr's Avatar
neveuxpr
Thread Starter
|
Amateur
Joined: Mar 2007
Posts: 46
Likes: 0
From: MA
Default High mount third brake light harness

Anyone know the part number or where I can get a socket for the 2012 Ram third brake light? I've searched high an low and ultimately came up with part number 05072577AA, which is the entire harness but I'm not sure if it's for the 2012.

Any suggestions?
 
Reply
Old Aug 13, 2013 | 12:52 AM
  #2  
TNtech's Avatar
TNtech
Site Moderator-Dodge Tech
Joined: Sep 2010
Posts: 3,724
Likes: 22
From: Nashville, Tennessee
Default

Did the bulb melt your socket? Have you looked into an aftermarket LED lamp assembly?
 
Reply
Old Aug 13, 2013 | 08:38 AM
  #3  
War Horse's Avatar
War Horse
All Star
Joined: Jun 2009
Posts: 975
Likes: 0
From: San Antonio, TX
Default

I'm not sure about the part number, but it should be the same for all 4th Gen trucks (2009 - 2014 1500s & 2010 - 2014 2500/3500s). All the 4th Gens use the same 3rd Brake Light, so you don't have to limit your search to a 2012 specifically.
 
Reply
Old Aug 13, 2013 | 11:20 PM
  #4  
neveuxpr's Avatar
neveuxpr
Thread Starter
|
Amateur
Joined: Mar 2007
Posts: 46
Likes: 0
From: MA
Default

I originally had an led light but went back to the stock with led bulbs. They're staying on dim and I added a plug n play resistor in line but the output socket didn't fit properly so i was trying to get another socket to solder onto the end of the resistor.
 
Reply




All times are GMT -4. The time now is 08:17 AM.