The 2013 Dodge Journey only has a continuous wiper mode.
In intermittent mode, they turn on once per lever movement on each level and stop working.
They stop in a good resting position.
I already replaced the relays.
Where is the intermittent clock?

Translated by Google...

 

Could be the multi function switch.

 

I replaced it with another (unfortunately also used) and the symptom is the same.
The signal comes from it because the wipers perform one cycle ...
Can the multi function switch be programmed somehow?

 

Does the BCM control the timing of the wipers?

 

I replaced it with another (unfortunately also used) and the symptom is the same.
The signal comes from it because the wipers perform one cycle ...
Can the multi function switch be programmed somehow?