I recently slid my Dodge into the tall curb, causing damage to the rack and pinion system. After the repairs were done I noticed my Anti skid light was on along with my Airbag warning light. I also found that I do not have any use of the functions on my steering column ( voice command, system information, cruise control). I’ve watched several videos and have checked the fuses under the passenger side dash and under the hood. There doesn’t seem to be any that are blown. What am I missing?
Did the repair shop forget to plug something back into the rack and pinion system

 

I could imagine that the wheel speed sensor might have been damaged when you hit the curb, especially with enough force to have damaged the rack and pinion. Also, when the R&P was repaired it may have been necessary to unplug the wheel speed sensor and it may not have been reconnected, or connected properly. I could see this explaining at least your issues with the anti-skid system and air-bag warning light. Maybe some of your other problems as well.