Check Engine/Ignition Problem
Thread Starter
|
Amateur
Joined: Oct 2009
Posts: 37
Likes: 0
From: Fairbanks, AK/ Kansas City, MO
Check Engine/Ignition Problem
I just replaced the #3 ignition coil on my 3.5 awd, now im getting an Ignition Sub-system C,D,F code, any idea what that is?? Mopar
said it was nothing, reset the computer, but the light came back on. 
did the key dance, 2317 is what came up
said it was nothing, reset the computer, but the light came back on. did the key dance, 2317 is what came up
Last edited by andrewdains; Jan 12, 2010 at 01:53 AM.
Code 2317 is ignition coil#6 secondary circuit insufficient ionization. Could be spark plug, coil pack, wiring or PCM. Why did you replace the coil on number 3? Maybe the coil pack you took off, install it on number 6.
Thread Starter
|
Amateur
Joined: Oct 2009
Posts: 37
Likes: 0
From: Fairbanks, AK/ Kansas City, MO
the casing for the #3 ignition coil was busted so it wouldn't stay in the hole, i changed out all the plugs. I made sure that the coils i took out went back into the respective cylinders. is it possible that the gap on the plug #6 doesn't match the rest? or maybe the injector isn't spraying correctly?