well, the RT wagon dashboard is ringing and chiming

first 2 codes were oil pressure sensor malfunction, and secondly low oil pressure. i believe they are related (ha ha)

the third one is puzzling 1521 ? any tips on what could be causing this to trip?

tia!

 

actron says 1521 is wrong engine oil, lol! that is not what came up.i lost the paper with the descriptions, the first two were easy to remember, guess i need to go and recheck and write it down again.

 

It is possible that a bad oil pressure sensor that is throwing codes indicating a bad sensor and low oil pressure are causing the PCM to think it is incorrect oil. Here is an excerpt from the manual that may help:

NOTE: If set along with P1521, repair any engine oil pressure or temperature DTCs first before continuing.
The following conditions must be checked.
² OEM recommended oil viscosity is being used.
² Customer is following the oil change schedule.
² Check the engine oil for contamination. (i.e., fuel and/or engine coolant)
² Internal engine condition that may effect oil pressure.
Were any of the above condition found?
Yes >> Repair as necessary.

I'm betting on a bad sensor.

 

Is it true that the hemi has 2 oil pressure sensors? Just what I have heard.

Thanks again for your help!!!!

 

Only 1 that I know about.