Dodge Magnum The Dodge Magnum, the wagon that made wagons cool. The unique look of the Dodge Magnum makes any trim level, from SE to SRT-8, an absolute head turner.

Replaced Plenum gasket in my 5.2 magnum and now got slight ticking noise?

Thread Tools
 
Search this Thread
 
Old Jan 16, 2025 | 02:27 AM
  #1  
joey_cjc's Avatar
joey_cjc
Thread Starter
|
Registered User
Joined: Jan 2025
Posts: 2
Likes: 0
Default Replaced Plenum gasket in my 5.2 magnum and now got slight ticking noise?

Ok so i replaced my plenum gasket on my 01 dodge ram 1500 5.2 magnum got it all back to gather and started fine and then a ticking noise if i kill it and start it again it goes away for a bit but comes back and starts to get louder any ideas what it could be?
 
Reply
Old Jan 16, 2025 | 09:56 AM
  #2  
dodgetruck2's Avatar
dodgetruck2
Record Breaker
15 Year Member
Community Builder
Joined: Sep 2010
Posts: 1,758
Likes: 156
From: Parker, SD
Default

try pulling the fan belt off and running it for a couple seconds and see if stays gone
 
Reply
Old Jan 16, 2025 | 04:33 PM
  #3  
joey_cjc's Avatar
joey_cjc
Thread Starter
|
Registered User
Joined: Jan 2025
Posts: 2
Likes: 0
Default

Originally Posted by dodgetruck2
try pulling the fan belt off and running it for a couple seconds and see if stays gone
so I drove it down the road and my oil pressure was jumping until I loss all oil pressure in all, the trucks motor was full of hard sludge when I pulled the keg off and my guess is some of it found its way in the oil pick up tube and was causing oil shortage to other parts of the motor causing the tick I am waiting on a tow truck now and when I get it home I am gonna drop the oil pan clean the pickup tube and change the filter and oil and I hope it fix it.
 

Last edited by joey_cjc; Jan 16, 2025 at 04:44 PM.
Reply




All times are GMT -4. The time now is 11:51 AM.