Back Seat Removal
#15
RE: Back Seat Removal
Okay, update. I finally got me a set of torx bits. You do indeed have to take the seatbelts out like I was told. 4 T55 bolts is all it is (they were semi-tough to break loose, looked like there was some type of glue put on them to prevent them from coming off very easily), then you push up on the bottom and the back seat pops out. Piece of cake. Front seat is goin too. High 15s are in my future when i go to the drags this week. I am at least going to break my best time at the very least pending I remember how to drive.
#17
RE: Back Seat Removal
ORIGINAL: techmanbd
Well the bottom part of the seat, just pull it up, comes right out. Be careful when putting back in. There are to rubber things that the bracket from the seat that it goes in, get at the wrong angle and you puch the rubber pieces through, and basically it is a hole to the outside. Experienced that one.
Well the bottom part of the seat, just pull it up, comes right out. Be careful when putting back in. There are to rubber things that the bracket from the seat that it goes in, get at the wrong angle and you puch the rubber pieces through, and basically it is a hole to the outside. Experienced that one.
#18
RE: Back Seat Removal
Luckily it was in my garage so didn't have to get another one. But 2 places I could think of, and that is go to a junk yard, I doubt anyone really looks for those so should be plenty as long as there are wrecked neons, or probably have to go to the dealer for that piece.