got me some bling. . .

they were on a slight back order, however I like the results. . .looks very slick

anyway, to the shifter. here is what the stock shifter looks like for the NV5600. . .and as you can see I have a slightly inverted H pattern



to remove the old ball just get a small flat tip and pry the center cap out.








once you have the center cap out, it just takes a 15mm socket to remove the retaining nut, then the stock shifter ball just spins off.

 

now onto the bling

here is the new ball next to the old




and the new one mounted




the new ball is about the same size as the old shifter ****. . .but it definately stands out[8D]

 

??? Are you forgetting to show what you replaced it with?

 

Where is the bling? Why the how to on the shifter ****? I'm confused. [sm=dontgetit.gif]

Never mind, I posted between your first one and your second one.

BTW you suck, I was gonna get one of those, now I'll have to make my own.

 

Doh, sorry. Looks good.

 

dang you guys are quick

I was thinking about just taking it off and leaving a threaded rod to shift with[8D]

 

I just noticed that your reverse in on the top right, the new ones its bottom left.

 

yup. . .I have the NV5600 monster. . .the old class 6-8 tranny.

 

That is sweet

 

stop it Drew... I'll need darker shades for all that bling ! he he.

Some times it's the little things that count..... makes me wish I had a shifter.