Does anyone have an opinion on the ISSPRO gauge kits that Dieselmanor sells? The prospect of buying a all in one kit appeals to me.

Does anyone know if the A pillar mount requires cutting the original cover like the Autometer ones?

I there any reason I should get a trans temp gauge for a 6 speed manual, or is that just a auto trans thing.

Does anyone else have a recommendation for a kit, and where to buy?

Getting ready to pull the trigger...

Thanks,

Curt.

 

This post could answer a lot of you questions
https://dodgeforum.com/m_855259/tm.htm
Welcome to DF

 

I bought my Isspro's from DieselManor. Everything I needed came with the kit. I suggest filling out your signature so we know what truck you have. If you have a 3rd gen, you just remove the two screws and pull off the old pillar. The new pillar is held on by just one screw. I don't think that a trans temp gauge on a 6spd is necessary.

 

Good point! My truck isa 2002 3500 CTD with 6 Speed

Curt.

 

Get the option with the fuel pressure gauge. You get everything you need except for the fittings and hose to go from your filter to the isolator. I did not want to spend the extra 50 on the diesel manor connection kit and purchased 3 feet of 5/16 id fuel hose and a 5/16 tee and spliced into the fuel line going from the filter to the injector pump.

Works and looks great.

 

I purchased the Isspro Guages (pyro,tranny,boost) andA pillar podmount fromDiesel Manor. I think they match one of the best out there w/ your cluster guages. You do not need a tranny guage for the manuel. like posted above. Get a fuel pressure guage w/ the boost & pyro. When get a chance I will get you a pic of my set up.

 

Getting a fuel pressure gauge sounds like a good idea. I think I'll call Monday and place the order.

How hard is it to run the boost and fuel pressure lines through the fire wall?

Curt.

 

I'm not sure about the 2nd gens but on the 3rd gen trucks, there is a hole just behind the brake pedal to run all your wires.