I'll have to check that out. I have mine mounted in the ash tray and not a big fan of it there. My thought was, have it out of sight so I can adjust it without the person seeing. I suppose they wouldn't be able to see it there either....ok, enough mindless rambleing

 

I'll see if I can snag a pic tonight.

I normaly only see the power number and have to lean forward a bit to check the torque number.

 

here's mine...

[IMG]local://upfiles/1508/47169841B66846B8A01BA5863AA6B92B.jpg[/IMG]

[IMG]local://upfiles/1508/24BB73B109C24324AC486CCEE885FC6D.jpg[/IMG]

 

steve, thats exactly where I have mine as well. . .velco's been holding pretty good.

 

I'll have to check that out....thanks for the pics

 

Did you have a edge before this?? just wondering if so which one do you perfer i'm looking for a programmer right now and was almost set on the edge then i see everyone is getting the TST

 

the edge has alot of good features that I wish the TST had, but for performance... the TST is my favorite...

 

cool than i think that i will start with the edge then after i get the tranny and everything beefed up i can switch to the tst which will be a couple years as long as i dont break the tranny with the edge