I thought I would ask here first for some advice. The truck i bought a few weeks back has the Edge Products programer and I was wondering if anyone can tell me how you adjust it to the different settings. Do I need to take it to a shop who deals with sort of set-up? I beleive its in a tow mode right now because it has a very quick 1-2, and 2-3 shift, but pulls very hard in third and forth gears. I would like to have it set in the mode for best fuel economy, and set the shift pionts higher.

Heres a pic of it.

[

My bad, heres the pic.

 

Is there a wire that runs from the box into the cab? If not its prbably just a plug in box, no adjustments.

 

I will have to check and see tomorrow. I havnt spent much time looking under the hood.

 

Looks like you have an edge ez, really no pwer adjustment, just low boost fueling adjustments. You move a jumper around for the different settings. Here's a pic.

[IMG]local://upfiles/30416/0A4E96E733D14A348D67E927DAB199F0.jpg[/IMG]

 

Wow, thanks for the info Jakebrake . If it is correct, Im possibly getting about 60-65HP increase. [sm=gears.gif]

 

Get the model number off the little grey sticker and we can see exactly what it is.

 

If you could, take pics of the inside of your EZ and how the jumper wires look. I'm kinda curious since I've never seen one before.

Thanks !!