Dodge/Ram Diesel Tech Discussions on all generations of Cummins Diesel powered Rams plus the new Eco Diesel

Need your help guys, got problems here.

Thread Tools
 
Search this Thread
 
Old Jul 27, 2007 | 12:30 PM
  #11  
RamFreak's Avatar
RamFreak
Veteran
Joined: May 2006
Posts: 411
Likes: 0
From: Kamas, UT
Default RE: Need your help guys, got problems here.

Ok here it is straight from the manual. "Starting procedure-- Engine Manifold Air Temperture Below 66F (19C) The temperture displayed on the overhead console (If equiped) does not necessarily reflect the engine manifold air temperture. When certain tempertures fall below 66F the lamp will remain on indicating the intake manifold heater system is active".

Hope this helps, mine has not come on since summer started beside 1 cold morning.. thats it.
 
Reply
Old Jul 27, 2007 | 04:51 PM
  #12  
moconst's Avatar
moconst
Thread Starter
|
Veteran
Joined: Dec 2006
Posts: 478
Likes: 0
From:
Default RE: Need your help guys, got problems here.

Mayfair, MOCONST means MO (my initials) contruction. Mike O construction, it my buisness. get it? Anyhow I think I will call edge and see what they say.

07 Thanks for that, my temps here have been around 50 still no light. Might have to call the dealer, idk.

Thanks for all the help guys
 
Reply
Old Jul 27, 2007 | 04:55 PM
  #13  
Mayfair's Avatar
Mayfair
Legend
Joined: Aug 2006
Posts: 8,529
Likes: 0
From: 100% Heaven Sent
Default RE: Need your help guys, got problems here.

Got it .... thats COOL !!
 
Reply
Old Jul 27, 2007 | 07:39 PM
  #14  
RamFreak's Avatar
RamFreak
Veteran
Joined: May 2006
Posts: 411
Likes: 0
From: Kamas, UT
Default RE: Need your help guys, got problems here.

Your welcome, anytime Mike.
 
Reply
Old Jul 27, 2007 | 07:42 PM
  #15  
jakebrake's Avatar
jakebrake
Champion
Joined: Feb 2006
Posts: 4,569
Likes: 0
From:
Default RE: Need your help guys, got problems here.

Mike, I believe the dashes do a bulb check on the newer trucks, when you first turno the key to on alll the lights come on for a secound or two. Check to see if the wait to start comes on then.
 
Reply




All times are GMT -4. The time now is 07:29 PM.