GEARS???
Thread Starter
Joined: Jul 2007
Posts: 28
Likes: 0
From:
RE: GEARS???
ORIGINAL: CutterW
Hey Mekanik, did ya ever get my pm bout your job? j/w and I know its off topic
ps My pickup runs like 1850 at 80
(bigger tires)
Hey Mekanik, did ya ever get my pm bout your job? j/w and I know its off topic
ps My pickup runs like 1850 at 80
(bigger tires)
i think my truck runs about 2500 goin 75mph...
Veteran
Joined: Jul 2007
Posts: 296
Likes: 0
From:
RE: GEARS???
ORIGINAL: FroneDaddy
Or just hit the interstate, if you have 3.73 your rpm's will be right around 2000 at 80 mph, with the 4.10's you will be around 2800 at 80 mph
Or just hit the interstate, if you have 3.73 your rpm's will be right around 2000 at 80 mph, with the 4.10's you will be around 2800 at 80 mph
Joined: Jan 2007
Posts: 1,328
Likes: 0
From:
RE: GEARS???
[blockquote]quote:
ORIGINAL: refloyd
I believe since your truck is an 03 it has the NV5600 which is not geared as low as the G56. I also believe that your brother in law's truck has the NV5600 in it 2.
[/blockquote]
Correct..........I didn't know the G56 was geared that much lower if your are turning 2,800 in 6th gear at 80 mph
ORIGINAL: refloyd
I believe since your truck is an 03 it has the NV5600 which is not geared as low as the G56. I also believe that your brother in law's truck has the NV5600 in it 2.
[/blockquote]
Correct..........I didn't know the G56 was geared that much lower if your are turning 2,800 in 6th gear at 80 mph
not true man, the the output ratio on the manual is lower than that of the auto's.
.
