Dodge/Ram Diesel Tech Discussions on all generations of Cummins Diesel powered Rams plus the new Eco Diesel

Check engine light and codes

Thread Tools
 
Search this Thread
 
Old Aug 21, 2007 | 08:29 AM
  #1  
Joel_MD's Avatar
Joel_MD
Thread Starter
|
Captain
Joined: Mar 2007
Posts: 680
Likes: 0
Default Check engine light and codes

Good morning fellas. On my way to work this morning my 'check engine' light came on about a minute after I started the engine. The light stayed lit during my 26-mile drive. While it was running I used the 'retrieve DTC' function on my Edge Attitude, and it came up with these codes:
P2262 - turbocharger
P0513 - invalid SKIM key

Once in the parking lot at work, I shut down the engine and cleared the codes on the Attitude. I immediately re-started the engine, and this time there was no check engine light. I checkedfor codes and there were none this time. What do you motorheads think? Just a one-time fluke, or the start of something bad?
 
Reply
Old Aug 21, 2007 | 11:06 AM
  #2  
Drew's Avatar
Drew
Professional
Joined: Aug 2004
Posts: 117
Likes: 1
From: 33.43.342, 84.21.602
Default RE: Check engine light and codes

sounds like a one time thing. . .keep on truckin
 
Reply




All times are GMT -4. The time now is 07:48 AM.