yes they are good prices. that is where I bought all the boots and clamps for my old truck.

 

Are those "hump hoses" the same as our boots?

What size are our boots?

Ican't believe the difference in price !!

 

I forget what size I ordered but i had them on my 98 12valve.

 

You can get a whole set with the constant torque bolts for $145. I asked them to make me a deal on the set and they did. They do not advertise the set, so you have to ask for it. I ordered all four and 8 new clamps. Hopefully this will fix the problem.

 

my ford use to do the same thing YES I SAID FORD NOW I OWN A 3500 RAM but i had to clean the inside of the hose with denatered alchohol and after cleaning i never had a problem i was told the alchohol makes the hose sticky,

 

Did they know what sizes to give you or did you hafta tell them Bob?

 

He pretty much knew the sizes when I talked to him on the phone. I went back out to the truck and measured them while he was on the phone, just to make sure. You need the 4" inch Hump hose and the 3" to 3 5/8" boot. 2 of each size of course. He told me I didn't need to change the cool side, but I figured go ahead and change all 4 and keep the 2 from the cool side of the intercooler as spares because these puppies are hard to find and I'd hate to be stuck on the side of the road with a ripped boot.

 

I don't know if it's safe to do or not, but when I put new grips on my bike, I rub a little gasoline inside of the grip ( the rubber part ) before i slide it on. It bonds the grip to the handlebar instantly and is pretty much inpossible to get off once it's on.

May work on the boots as well.

 

I've got 2 old ones that I can play with.