Dodge/Ram Diesel Tech Discussions on all generations of Cummins Diesel powered Rams plus the new Eco Diesel

Whats your HP and are you running stock tranny?

Thread Tools
 
Search this Thread
 
  #11  
Old 12-03-2007, 07:22 PM
Drew's Avatar
Drew
Drew is offline
Professional
Join Date: Aug 2004
Location: 33.43.342, 84.21.602
Posts: 117
Likes: 0
Received 1 Like on 1 Post
Default RE: Whats your HP and are you running stock tranny?

for the stick guys w/nv5600's all we need is a beefire clutch and we can handle just about anything the engine can put out. G56 guy's will need to loose the DMF if they plan to BOMB the truck. me, I'm still on my stock clutch and she's amazingly holding 425+.

425 was on the dyno smarty #5 TST 2/1, however just before I strapped in I was running my TST on 4/2 without any slipping and my lift pump was also able to keep up as well
 
  #12  
Old 12-03-2007, 08:37 PM
usafr's Avatar
usafr
usafr is offline
All Star
Join Date: May 2006
Location:
Posts: 898
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Whats your HP and are you running stock tranny?

I've got my Bully Dog turned up so Im guessing somwhere around 400hp,, don't know what's actually getting to the wheels. Keep in mind though, I drive like I have some good sense. I'm easy on it and only get on it in traffic and stuff when I need to. If I do take off hard, the trans slips. It slips with the programmer in the middle setting. The first setting is pretty safe, it only adds like 45hp.
 
  #13  
Old 12-03-2007, 09:30 PM
R0oster31's Avatar
R0oster31
R0oster31 is offline
Veteran
Join Date: Mar 2007
Location: Mississippi
Posts: 485
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Whats your HP and are you running stock tranny?

ORIGINAL: energinerbuzzy

I'm looking for info from folks with auto's but I'm sure someone can use info on what you've done to you manual to handle the extra HP. And all I'm looking for is a best guess on HP. Like if your motor has 325 HP and you added 100 HP. I don't need to know what your getting at the rear wheels.
I'm not really sure how much I'm getting, everything says they will add XXX amount of power, but in reality some of them work together, so you don't see the wholeamout of all the parts. I started with the 235 engine. Any guesses?
 
  #14  
Old 12-03-2007, 09:34 PM
NCcummins's Avatar
NCcummins
NCcummins is offline
Record Breaker
Join Date: Jul 2007
Location: The Dirty South
Posts: 1,833
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Whats your HP and are you running stock tranny?

well, with a completely broke tranny i was at 280 on the stocker pretty much gone...but now with the smarty and mostly billet tranny, i would like to see 400 or soo...ill know next week, i am now going on my third torque converter and hopefully that last...after installing the smarty....its a whole new truck...and the rest of my mods are in the sig...

 
  #15  
Old 12-03-2007, 09:44 PM
04QC4X4's Avatar
04QC4X4
04QC4X4 is offline
Captain
Join Date: Aug 2007
Location: Amarillo, TX
Posts: 569
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Whats your HP and are you running stock tranny?

I run my power puck on the 60 hp setting and it seems to be fine, but I can turn it on the 90 hp setting and I can feel the transmission slip when I get on it. Be careful!
 
  #16  
Old 12-03-2007, 10:15 PM
behindbars's Avatar
behindbars
behindbars is offline
Join Date: Oct 2007
Location:
Posts: 801
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Whats your HP and are you running stock tranny?

I tried it a couple times. Set the slip percentage to show on the monitor and put the Edge on 5. Don't have to push too hard on the skinny pedal to get slippage. Usually I only run it on 1 or 2 and shows no slippage.
 
  #17  
Old 12-03-2007, 11:21 PM
energinerbuzzy's Avatar
energinerbuzzy
energinerbuzzy is offline
Banned
Thread Starter
Join Date: Nov 2007
Posts: 1,100
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Whats your HP and are you running stock tranny?

Well that ansews my question. 60 HP max for me right now till I can do something about the tranny!!
Thanks
 
  #18  
Old 12-04-2007, 12:02 AM
nickcoletti's Avatar
nickcoletti
nickcoletti is offline
Record Breaker
Join Date: Apr 2007
Posts: 1,512
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Whats your HP and are you running stock tranny?

this is all good stuff to know considering i had planned to go up in H/P w/ a chip shortly..... maybe i will put the upgrade money into a new tranny so i will be safe[:-]
 



Quick Reply: Whats your HP and are you running stock tranny?



All times are GMT -4. The time now is 07:27 PM.