you have to disconnect the plug, remove the blank that is there, insert the wire you can get directly from cummins, then you will need to have some extra wire handy to extend it to the frame to ground it out.

 

is there a certain part number ether front cummins or from dodge for the wire? or does cummins only use one style of connector wire?

 

you can only get the wire from cummins. . . The Pig tail part number is 3824810, bring $12 with you and your out the door.

 

awesome thanks, your wife must love all the time you spend logged on.

 

Nick, Bully Dog screwed with my computer and ended up putting the truck in fuel limp mode. I had no low end power at all, it was like driving a gasser with a plugged cat. So, after it blew my boost pressure sensor, and a reflash, not to mention tear the wastegate down to get unplugged, ended up being about $600 dollars for all this. Pain in the @#%$in ***. I also know a lot of guys here in Missouri that have had tons problems. One guy had a powerjoke with triple dog downloader and it ruined the entire computer. So, no bully dog for me.

 

I do most of my time here while I'm at work. . .where I get payed to do this

 

does my 01 have this high idle feature? or is it just the 3rd gens.

 

I know this post is kinda old but I just got home... anyways When I used my smarty to program it automatically enabled it. I turned it back to stock and it still worked to so I guess if you know someone with a smarty you could just program up to one of the settings then go back to stock and it should stay...

 

Aero, was there an option in the Smarty to enable it, or was it just part of the program and itenabled it automatically?

 

I guess its part of the program... I didn't have it before then programed it and tried it and it worked [&:]. Turned it back to stock and it still works so it must do it automatically, Buzzy had some kinda post on High Idle and trying to get it to work, he has a Smarty Sr. though maybe there different [&:]

Anyone with a smarty jr or sr. can add in....