Approx $1500 give or take, +labor

 

with what you have listed. . .I'd say your looking good. . .that torque converter is going to blow your mind with how much better it performs over the stocker.

 

thnx drew, so which do you think you would go with for the valve body(ats or suncoast) and pan(ats or mag-hytec, deep or double deep)? Plus do you think a TCI tc will suffice?

 

I would probably skip the pan and put it towards the TC, you can easily save for the pan later and install yourself.

 

I missed the orginal problem... what was wrong with it for you to bring it to the stealer?

 

The tranny was slipping a little bit, so I just wanted them to check it out. Heres the original link http://www.DodgeForum.com/m_1284205/tm.htm. But its real funny that after I got a second opinion, they stated there is nothing wrong with the tranny. Believe me, this is all going straight to DC, that service mngr is going to have a big problem on his hands.

 

They dont call it the stealership for nothing! I keep putting off bringing mine in for the valve cover being possibly cracked causing a small oil spot on top, will probably tell me its cracked because I dont have a cat.