Hey, I just turned off the seatbelt chime in my Grand Cherokee for off roading, and was wondering if there is a way to do it for the Ram. The jeep involved turning the car to on twice then unbuckling and buckling in three times in 10 sec followed by turning off the ignition. Tried the same thing in the Ram for fun, did not work.

 

Guess I should have searched first. Found the answer.

 

What is the answer?

 

[sm=icon_rtfm.gif]

It's in there

 

I Read, I Tryed, I Failed;;; It reads so simpel ;; with key off insert seatbeld, start truck, wait for seatbelt light to go off unbuckle & rebuckle at least 3 times (withen 10 sec.), all with in 60 sec. of turning key on. after you turn key off a single ding lets you know you have done it right. IT sounds sooo simple!!

 

Took me two tries in my truck... the light still stays on but it doesn't do the annoying chiming noise anymore. I did mine so I can cruise around the subdivisions we build in and I can get in and out at every house and not have to put my seatbelt back on everytime.

 

I managed to get it the 1st time. nice having it disabled.

 

Screw the seatbelt... I want the damned horn to not sound when I open the frickin' door!

 

that sucks... they tried to get me to go in and have that update done but I said no thanks...

 

That's why I haven't been to the dealer to get my high idle turned on, I sent the card back saying I didn't need it, trucks fine but I don't want it turned on.

I was pulling trees with the truck the other day and it would have been a pain to shut the door every time I got out to switch the strap to another tree