Hello all
#1
05-06-2008, 08:51 PM
Thread Starter
Join Date: May 2008
Location:
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Hello all
hello this will be thrid dodge ram my first two where both 1997 ram 1500 ex cab 2wd
Ive now went up to 1998 dodge 2500 4x4 24vavle cummines turbo diesel
http://www.autotrader.com/fyc/vdp.js...&cardist=1
everything is pretty sound. truck runs great. the price seemed a little low tho
Ive now went up to 1998 dodge 2500 4x4 24vavle cummines turbo diesel
http://www.autotrader.com/fyc/vdp.js...&cardist=1
everything is pretty sound. truck runs great. the price seemed a little low tho
#2
05-06-2008, 08:56 PM
Join Date: Jul 2006
Location: Swollen Beaver, OR
Posts: 2,800
Likes: 0
Received 0 Likes
on
0 Posts
RE: Hello all
Welcome to the forum and congrats on the new ride.
You'll find a lot of folks with a lot of good info to help you out with that diesel.
Take a peek through some of the DIY's up near the top and you'll find a lot of useful info for maintaining these puppies......not that they require anything overly extensive.
Again, welcome, holler if ya need anything.
Rich
You'll find a lot of folks with a lot of good info to help you out with that diesel.
Take a peek through some of the DIY's up near the top and you'll find a lot of useful info for maintaining these puppies......not that they require anything overly extensive.
Again, welcome, holler if ya need anything.
Rich
#3
05-06-2008, 09:28 PM
Thread Starter
Join Date: May 2008
Location:
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
#4
05-06-2008, 09:42 PM
RE: Hello all
Most of the folks here use Recon lights www.gorecon.com
RedRam05baby did a write up on how to install them but that was on a 3rd gen. I want to say Mayfair did one for the 2nd gens...happy searching
RedRam05baby did a write up on how to install them but that was on a 3rd gen. I want to say Mayfair did one for the 2nd gens...happy searching
#5
05-06-2008, 09:45 PM
Join Date: Jul 2006
Location: Swollen Beaver, OR
Posts: 2,800
Likes: 0
Received 0 Likes
on
0 Posts
RE: Hello all
The light kit themselves is only about $80. They usually come with the template to mark and drill the holes, if you get the factory ones.
If you decide to go the factory route, the best one to ask would probably be Dave (parts/service), he's the Service and Parts manager at O'Neal Dodge.
If you decide to go the factory route, the best one to ask would probably be Dave (parts/service), he's the Service and Parts manager at O'Neal Dodge.
