Dodge/Ram Diesel Tech Discussions on all generations of Cummins Diesel powered Rams plus the new Eco Diesel

Quadzilla Commander

Thread Tools
 
Search this Thread
 
Old May 20, 2008 | 08:01 AM
  #1  
CowboyBob's Avatar
CowboyBob
Thread Starter
|
Record Breaker
Joined: Oct 2005
Posts: 1,386
Likes: 0
From:
Default Quadzilla Commander

Does anyone else have one of these things? Is yours as big a POS as mine? I noticed this last weekend that when I transmit on the CB the EGT read out goes to 1600 or higher. Before you say it is the CB, no I don't have a foot warmer hooked up to it and yes I have checked the cable and antenna. I'm a HAM radio guy too and know all about that stuff and the SWR is set dead on.

I've never noticed this before because I never transmit on the CB. My wife got on there and started talking to the truckers on our last trip and it took me a few minutes to figure out what was going on. The EGT alarm kept going off, but when I would look at the read out, it would go back down to normal after a few seconds. The truck never mis-fired, smoked, threw a codeor did anything to lead me to believe that there was anything wrong and then I realized the EGTs were jumping everytime my wife was talking!
 
Reply
Old May 20, 2008 | 12:36 PM
  #2  
olddodge's Avatar
olddodge
Rookie
Joined: Jan 2007
Posts: 60
Likes: 0
From:
Default RE: Quadzilla Commander

Thats alot of hot air.LOL
 
Reply




All times are GMT -4. The time now is 07:46 AM.