My truck racing a 1st gen- Check out the vid!
Veteran
Joined: Sep 2007
Posts: 405
Likes: 0
From:
RE: My truck racing a 1st gen- Check out the vid!
Mayfair, do you remember in Parts/Service's truck show post the truck with the hood stack that you liked? If you did it like that with down pipe turned up, you could have it fit into a piece of pipe permanently mounted on the hood.
Banned
Joined: Aug 2006
Posts: 1,184
Likes: 0
From: Casper, Wyoming
RE: My truck racing a 1st gen- Check out the vid!
ORIGINAL: Drew
a hood stack is not that hard, just turn the down tube 180* and add in a few bends up to the hood, then cut a hole in the hood about 1" larger in diameter, slap on the stack and your good. just make sure the tube from the turbo extends about 1-2" into the stack mounted on the hood.
however there is something else to consider, local ordinances about where the exhaust can exit the vehicle. most laws dont like the exhaust exiting the vehicle infront of the cab.
ORIGINAL: dirtydodge02
I thought a hood stack would be kick *** on mine, but I have no idea what all would go into a mod like that...
I thought a hood stack would be kick *** on mine, but I have no idea what all would go into a mod like that...
a hood stack is not that hard, just turn the down tube 180* and add in a few bends up to the hood, then cut a hole in the hood about 1" larger in diameter, slap on the stack and your good. just make sure the tube from the turbo extends about 1-2" into the stack mounted on the hood.
however there is something else to consider, local ordinances about where the exhaust can exit the vehicle. most laws dont like the exhaust exiting the vehicle infront of the cab.
Legend
Joined: Aug 2006
Posts: 8,529
Likes: 0
From: 100% Heaven Sent
RE: My truck racing a 1st gen- Check out the vid!
ORIGINAL: burban2002
Mayfair, do you remember in Parts/Service's truck show post the truck with the hood stack that you liked? If you did it like that with down pipe turned up, you could have it fit into a piece of pipe permanently mounted on the hood.
Mayfair, do you remember in Parts/Service's truck show post the truck with the hood stack that you liked? If you did it like that with down pipe turned up, you could have it fit into a piece of pipe permanently mounted on the hood.