Dont ask me why I want it, but I do.Ive been searching the web on how to do it, but cant find any good info. I see there is a lot of smoke switches out there, but how do I do it?
Thanks guys

 

heres a few videos of the install

http://www.dieselbombers.com/5-9l-24...ke-switch.html

 

Im looking for directions for a 3rd gen, not a 2nd. Any Ideas?

 

Cmon Steve, I know you have my answer!

 

tst w/cr49 programming set to 9/9... will get you enough smoke to stop an intersection dead in it's tracks...

 

What if I dont have a TST and only have the edge? Switch would be neat. I cant find out how to do it tho. Any thoughts?
Thanks Steve.

 

set your power up to 5 & the minor adjustment also to 5... watch your tranny though, if it's not built already, you will need a rebuild soon. it wont last long at those power levels.

 

So about the smoke switch. How to? DIY?

 

Bump....

 

i would also like some info on this, i just bought an 06 and i want the black smoke to pure but i also want lots of power, i dont plan on rebuilding my tranny anytime soon...what reprogrammer would you recommend for that? 2006 4x4 auto 5.9