rear drive shaft support bearing
Thread Starter
|
Professional
Joined: Jun 2006
Posts: 159
Likes: 0
From:
rear drive shaft support bearing
does anybody make a better then stock rear drive shaft support bearing??
replacement is a dealer only part. but i drive hard and ive gone throught all 3 u joints and now the support bearing at 50K. i just got the factory one today it is a sealed bearing. im gonna try and see if i can install a grease zerk so i can atleast pump some grease in from time to time but id like to see if anyone makes a better one??????
replacement is a dealer only part. but i drive hard and ive gone throught all 3 u joints and now the support bearing at 50K. i just got the factory one today it is a sealed bearing. im gonna try and see if i can install a grease zerk so i can atleast pump some grease in from time to time but id like to see if anyone makes a better one??????
Veteran
Joined: May 2007
Posts: 477
Likes: 0
From: SE MN
They make a 1 piece alum drive shaft that gets rid of the carrier bearing. They only work on 4wd models. 2wd have a cross member that gets in the way. They are about $450 if you look around.
Factory part numbers for 4WD:
Auto: 52123220AB
6spd: 52123162AA
Factory part numbers for 4WD:
Auto: 52123220AB
6spd: 52123162AA
