I just finished installing the PMT into my truck, now everytime I go to key up the mike on my CB Radio, it cuts out/reboots my PMT. I have thoroughly double checked all the wiring in the truck on both the PMT and the CB radio and everything is perfect. There are no frayed wires, grounds are secure, wires are intact. I am puzzled... anyone have any ideas....???

 

You might want to check a couple of things. Is the PMT pulling power from the same power feed as the CB (could be too much of a voltage drop for the PMT)? Is the SWR at 1 to 1 or 1 to 1.5, high SWR on a CB will pull a lot of power( high meaning anything over 1 to 1.75). Is the radio, antenna or cable close to the PMT? RF energy can play havoc on electronic systems. Just my .02 worth.