Dodge/Ram Diesel Tech Discussions on all generations of Cummins Diesel powered Rams plus the new Eco Diesel

98 24v question?

Old Apr 7, 2011 | 09:24 PM
  #1  
idaho2500's Avatar
idaho2500
Thread Starter
|
Registered User
Joined: Apr 2011
Posts: 27
Likes: 0
Default 98 24v question?

Hey guys just got home with my 98 dodge 2500 24 valve Auto transmission. So I noticed on the way home the RPM tech was jumping from 1300 to 1600 RPM in I think 3rd gear I was going 45 MPH?? Is this normal or is something wrong it sound normal don't hear any variation in the moter at all could it be the gage?
 
Reply
Old Apr 7, 2011 | 10:34 PM
  #2  
Ram_King's Avatar
Ram_King
Professional
Joined: May 2008
Posts: 210
Likes: 0
From: Aurora, Ohio
Default

sounds like tc, or trans? how many miles? and also, beware of the 53 block with your 24v, if your planning on doing any kind of upgrades it will not hold up.
 
Reply
Old Apr 7, 2011 | 11:10 PM
  #3  
idaho2500's Avatar
idaho2500
Thread Starter
|
Registered User
Joined: Apr 2011
Posts: 27
Likes: 0
Default

What is TC & what is wrong with the 53 block can it be fixed?

It has 155,500 miles.
 
Reply
Old Apr 8, 2011 | 02:00 AM
  #4  
jasonw's Avatar
jasonw
Site Moderator
Joined: Jan 2008
Posts: 8,374
Likes: 28
From: Sioux Falls, SD
Default

Will move this to the diesel section, mostly gassers over here. Get you more help over there.
 
Reply
Old Apr 8, 2011 | 09:37 AM
  #5  
12valveman's Avatar
12valveman
Professional
Joined: Feb 2008
Posts: 146
Likes: 0
From:
Default

first thing i would look at is how clean battery cables are. make sure they are very clean and battery posts are as well dirty cables cause the alternator to put out spikes in voltage and this causes the torque converter to lock and unlock . if the cables are clean i would have someone check the accelerator position sensor and possibly a check on the torqe converter clutch if it is all possible with their scan tool
 
Reply
Old Apr 9, 2011 | 01:15 AM
  #6  
idaho2500's Avatar
idaho2500
Thread Starter
|
Registered User
Joined: Apr 2011
Posts: 27
Likes: 0
Default

Ya I did clean all the batt cables and it did not help I did not do the the Alt cables but what I did do help with the batt voltage.
So I took the truck back to the dealer Meridian Ford and they will have their mechanic go threw it BUT he told me they thought they fixed it he showed me what they did NEW IP, NEW break pads and flush, changed oil, New glow plugs and a few other things..
So I have my fingers crossed the truck is real clean and I just love it! I also have a Bulldog chip I think the General on the job I am running said make me a offer so I said $75 and he said OK!! SWEEEET
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 09:14 PM.