Dodge/Ram Diesel Tech Discussions on all generations of Cummins Diesel powered Rams plus the new Eco Diesel

2007 2500 5.9 starting

Thread Tools
 
Search this Thread
 
  #1  
Old 05-07-2011 | 02:05 AM
cgourley2's Avatar
cgourley2
Thread Starter
|
Registered User
Joined: May 2011
Posts: 8
Likes: 0
Exclamation 2007 2500 5.9 starting

I just bought a 2007 dodge 2500 with the 5.9 cummins engine 125000 miles, the truck runs really good, but when starting it usually cranks a few times before it fires and starts, idk what the problem is, one guy said that its probably normal and another told me my injectors might be getting bad, it starts like theres almost are in the fuel lines or something, idk , the truck runs great once its running, and it starts the same everytime whether the engine is hot or not, if anyone has any advice or info id sure like to hear from you thanks
 
  #2  
Old 05-09-2011 | 01:12 PM
weedahoe's Avatar
weedahoe
Hall Of Fame
Hall of Fame Member
Joined: Mar 2009
Posts: 19,168
Likes: 21
From: South GA
Default

Welcome to the site. I will move this over to the CTD section for you.
 
  #3  
Old 05-09-2011 | 10:33 PM
horatio102's Avatar
horatio102
Champion
Joined: Feb 2005
Posts: 3,710
Likes: 1
From: Skagit County, WA
Default

Load test your batteries, they could be getting a little weak.
 
  #4  
Old 05-10-2011 | 12:40 AM
cgourley2's Avatar
cgourley2
Thread Starter
|
Registered User
Joined: May 2011
Posts: 8
Likes: 0
Default

i noticed that the cooler the engine is the easier the truck is to start, i had run it for an hour down the highway the other day and then shut if off then went to start it again about 10 mins later and i had to crank on it for like 5 secs, could it be a bad sensor or is the injector pump getting weak?, or would weak batteries affect that?
 
  #5  
Old 05-10-2011 | 08:53 AM
98Dakota's Avatar
98Dakota
Rookie
Joined: Apr 2006
Posts: 92
Likes: 0
Default

What is your idle set at?
 
  #6  
Old 05-10-2011 | 09:36 AM
cgourley2's Avatar
cgourley2
Thread Starter
|
Registered User
Joined: May 2011
Posts: 8
Likes: 0
Default

i havent checked it yet, but i think its set at about 700 or 800 rpm when its warm, it runs about 1000 when its cold, ill check it today and get back to you though, thanks
 
  #7  
Old 05-10-2011 | 11:42 AM
cgourley2's Avatar
cgourley2
Thread Starter
|
Registered User
Joined: May 2011
Posts: 8
Likes: 0
Default

this morning when i started it up it started easy and it ran about 700-800 rpm, but it starts harder after the engine gets hot
 
  #8  
Old 05-11-2011 | 08:57 AM
98Dakota's Avatar
98Dakota
Rookie
Joined: Apr 2006
Posts: 92
Likes: 0
Default

Idle should be at 850 with the air conditioning on full ...mine if the idle is set low is hard to start as well ..so i would check the settings (your year) for be sure it is set right it might be your problem..
 
  #9  
Old 05-11-2011 | 11:35 AM
cgourley2's Avatar
cgourley2
Thread Starter
|
Registered User
Joined: May 2011
Posts: 8
Likes: 0
Default

thanks, i will check it again and set it if it needs it, thanks for the tip
 
  #10  
Old 05-13-2011 | 12:40 AM
cgourley2's Avatar
cgourley2
Thread Starter
|
Registered User
Joined: May 2011
Posts: 8
Likes: 0
Default

i checked the idle and its set right, it still starts hard when the engine is warm, im getting it checked out on monday, i think its probably the injection pump, some kind of sensor or a bad check valve in the lift pump, does anyone have any suggestions?
 



All times are GMT -4. The time now is 05:45 PM.