Dodge/Ram Diesel Tech Discussions on all generations of Cummins Diesel powered Rams plus the new Eco Diesel

03 2500 Daily Driver?

Thread Tools
 
Search this Thread
 
  #11  
Old 08-20-2011, 11:36 PM
horatio102's Avatar
horatio102
horatio102 is offline
Champion
Join Date: Feb 2005
Location: Skagit County, WA
Posts: 3,710
Likes: 0
Received 1 Like on 1 Post
Default

CI-4 was the oil specification for diesel oil prior to 1/1/07 when the 6.7 hit the streets.

CJ-4 is the new oil specification for diesel trucks - minus a lot of the good stuff from the CI-4 oil because those good things (or other things that got removed at the same time) clog DPFs

DPF is, like he said, a diesel particulate filter. The DPF catches the soot particles, collects them, and when there is enough collected the ECM causes a major fuel injection event to raise EGTs that then burns off the accumulated soot.

So to make clean air, we consume more fuel. That makes sense, right?
 
  #12  
Old 08-21-2011, 03:20 PM
CSCustomCars's Avatar
CSCustomCars
CSCustomCars is offline
All Star
Thread Starter
Join Date: Oct 2007
Location: Upstate NY
Posts: 955
Likes: 0
Received 10 Likes on 2 Posts
Default

^^ no it doesn't. I know all about these rush for green use more to use less bull crap. I'm not going into that argument, just know I'm agreeing with you 1000%
However, I'm now in the process of trying to buy a 2000 Cummins. Would that year still have a DPF type emissions system on it? I live in NY, and I don't believe there are any extra requirements for a year 2000 diesel truck other than what the factory put on it.
 
  #13  
Old 08-21-2011, 07:23 PM
(texas-ram)325HP's Avatar
(texas-ram)325HP
(texas-ram)325HP is offline
Veteran
Join Date: Mar 2011
Location: Texas
Posts: 263
Likes: 0
Received 0 Likes on 0 Posts
Default

DPF on the cummins think it started in late 06 or the 07 model cummins
 
  #14  
Old 08-22-2011, 06:03 PM
CSCustomCars's Avatar
CSCustomCars
CSCustomCars is offline
All Star
Thread Starter
Join Date: Oct 2007
Location: Upstate NY
Posts: 955
Likes: 0
Received 10 Likes on 2 Posts
Default

^^ Thats what I had thought.
 
  #15  
Old 08-22-2011, 06:50 PM
horatio102's Avatar
horatio102
horatio102 is offline
Champion
Join Date: Feb 2005
Location: Skagit County, WA
Posts: 3,710
Likes: 0
Received 1 Like on 1 Post
Default

Build date of 1/1/07 or newer will have the physical EGR system and DPF.

2000 MY will have the lift pump you're going to want to replace ASAP to avoid problems down the line, and I'm not sure what years were subject to the major flaws, but search for "53 block" and the "killer dowel pin". Both are fixable, but just know about them.
 
  #16  
Old 08-23-2011, 12:06 PM
(texas-ram)325HP's Avatar
(texas-ram)325HP
(texas-ram)325HP is offline
Veteran
Join Date: Mar 2011
Location: Texas
Posts: 263
Likes: 0
Received 0 Likes on 0 Posts
Default

94-98 down pin and 98.5-02 53 block I believe but the down pin is on the 2nd gen 12vs
 
  #17  
Old 08-23-2011, 09:30 PM
CSCustomCars's Avatar
CSCustomCars
CSCustomCars is offline
All Star
Thread Starter
Join Date: Oct 2007
Location: Upstate NY
Posts: 955
Likes: 0
Received 10 Likes on 2 Posts
Default

I will look for the 53 block, I've read that quickly on the forum. I don't know what the problem with it is, but, I read about them, basically avoid them.
The lift pump I knew about already. I will replace that when I have $600 for the aftermarket one (I can't remember the manufacturer). I think I'll be okay in the mean time as I have no plans on adding power, or increasing fuel. I'm not going to do anything like that until I know a lot more about diesels and whats good and whats bad.
The 2000 has a short warranty with it when I buy it.
 
  #18  
Old 08-23-2011, 10:53 PM
horatio102's Avatar
horatio102
horatio102 is offline
Champion
Join Date: Feb 2005
Location: Skagit County, WA
Posts: 3,710
Likes: 0
Received 1 Like on 1 Post
Default

53 blocks tend to crack more often for some reason.



Airdog or Fass are the two big players in aftermarket reliable lift pumps.
 



Quick Reply: 03 2500 Daily Driver?



All times are GMT -4. The time now is 03:20 AM.