Ball Joints and Hub Bearings
Thread Starter
|
Amateur
Joined: Apr 2011
Posts: 26
Likes: 0
Ball Joints and Hub Bearings
Have an 09 2500 6.7 needing to replace ball joints and hubs, what is everyone using when replacing stock. Thinking Moog joints and Timken bearings, dont know much about the adjustable Moog joint that cost almost double of standard upper
Thanks,
Slim328
Thanks,
Slim328
Administrator
Joined: Apr 2010
Posts: 87,407
Likes: 4,214
From: Clayton MI
The adjustable joints are for folks with camber problems. Don't think you should need those.
XRF also supposedly makes good balljoints, along with proforged? (and those I think are actually made in the states.... not 100% on that though.) National, or Timkin for bearings *should* be good.
XRF also supposedly makes good balljoints, along with proforged? (and those I think are actually made in the states.... not 100% on that though.) National, or Timkin for bearings *should* be good.
