HEEEEEEELLLP....HI RODRIGO FROM COSTA RICA

I HAVE CHANGED BOTH SENSORS (POSITION CAM SENSORS), SO THEY ARE WORKING OK NOW. I ALSO CHAGED THE POWER STEERING PUPM, BECAUSE IT WAS NOT WORKING PROPERLY, THINKING THAT IT WAS SLOWING THE BIG BELT. I HAVE CHECKED THE AC, AND THEY SAY IT IS WORKING OK. I GET THE CODE ONLY WHEN I USE THE AC.

CAN SOMEONE HEEEEEEEEEELLLLPPPPPPPP.........PLS

REGADS

RODRIGO TOMAS
antano@hotmail.com

 

only when useing the A/C you say. . . .I'm wondering if you have a bare wire that has chaffed through and is grounding out.

check the wires comeing from the A/C compressor and see if any are touching bare metal, if they are look to see if any have been rubbed enough to cause a grounding issue.

another issue might be the wireing harness to the fan. check both those out and let us know what you find.

 

P0341


Camshaft Position Sensor Circuit Range/Performance


If that helps any......

 

Ive seen this code pop up in the past when the A/C is turned on. . .most of the time is was the power wire to the A/C compressor that was grounding out.