Has anyone else had this problem,it seems the (automatic)tranny will not go into over drive and at the same time this happen the cruise control stopped working.I checked the common fuses but nothing.I keep hearing from people something about flashing the system,anybody have software for this.or know what is going on
Mike

2003 Ram 3500 Diesel

 

Should we guess what year truck you have? lol

 

2003 Ram 3500 diesel, automatic

 

give him a break, he's new and didn't know that Mayfair was the only one who can read minds.

 

I had a problem where my truck would not go into tow/haul mode. The dealer had to replace the entire ECM.

 

Heres the funny thing ,the truck had the same problem about a year ago with some other problems ,so I took it in to the dealer ,they had the truck for a week and repaired the truck ,when I looked at the paper work they gave me back there was no mention about the repair for the tranny problem,they said there was nothing worng with it...the truck is now out of warranty(about 1,000 miles over warranty) so I have to fix it myself.

[IMG]local://upfiles/54699/66280840495D48A7B9D5865B8BEC534E.jpg[/IMG]

[IMG]local://upfiles/54699/17509E9016F146D990664C4C44D35BD8.jpg[/IMG]

 

Shiddy situation, but NICE truck !!

Welcome aboard brotha !!

 

it does sound like an ECM issue. even though the CEL light is not on I would see if there are any codes on there. . .turn the key from off to run three times but DON NOT start and look where the odometer reads out, if it just says done there is nothing there, but if something does come up let us know.

 

Hi Drew
I did get a code P0700,any idea what it may be
Thanks
Mike

 

Just finding my way around this site and found the codes
P0700 = Transmission Control System Malfunction
19
Now where do I start Looking??????????