Dodge Ram SRT-10 The best claim to fame. the world's fastest production pick up, the Dodge Ram SRT-10. With outstanding Viper inspired styling, power and handling, this sport pick up will blow the doors off anything that gets in it's way.

Mopar stage 1 PCM?

Thread Tools
 
Search this Thread
 
Old Aug 5, 2006 | 04:02 AM
  #1  
Robertm235's Avatar
Robertm235
Thread Starter
Joined: Aug 2006
Posts: 13
Likes: 0
Default Mopar stage 1 PCM?

Anybody know anything about the Mopar stage 1 PCM? Is it worth the $$ ($350) what king of performance will I get out of it?
 
Reply
Old Aug 5, 2006 | 08:15 AM
  #2  
trw0042's Avatar
trw0042
Joined: Jul 2006
Posts: 46
Likes: 0
Default RE: Mopar stage 1 PCM?

I havent done much research on the mopar pcm upgrades, but when i first started posting messages on here everyone led me towards the xmetal or dcperformance pcm upgrades.
 
Reply
Old Aug 5, 2006 | 12:07 PM
  #3  
mmmm_torque's Avatar
mmmm_torque
Professional
Joined: Dec 2004
Posts: 126
Likes: 0
From: Morrisville, NC
Default RE: Mopar stage 1 PCM?

It may be worth it for the QC, especially in areas where you can only get 91 octane. If you are in a state that has 93, then stage II is the only way to go

 
Reply
Old Aug 5, 2006 | 10:34 PM
  #4  
mosrt10's Avatar
mosrt10
Joined: Mar 2006
Posts: 19
Likes: 0
Default RE: Mopar stage 1 PCM?

what is the part numbers for the mopar stage 1 and stage 2

[IMG]local://upfiles/31016/D970D90103A2435886640615C0A77571.jpg[/IMG]
 
Reply
Old Aug 6, 2006 | 01:37 PM
  #5  
Robertm235's Avatar
Robertm235
Thread Starter
Joined: Aug 2006
Posts: 13
Likes: 0
Default RE: Mopar stage 1 PCM?

Thanks for the response. I am unable to get in touch with anybody at X-metal or DC performance and I can find absolutely no information on what kind of HP gains I would get from the mopar stage 1 PCM. I even called several Dodge dealers and none of them said they could even get it!! Not having much luck with the whole PCM upgrade thing!!!!
 
Reply
Old Aug 6, 2006 | 04:48 PM
  #6  
mosrt10's Avatar
mosrt10
Joined: Mar 2006
Posts: 19
Likes: 0
Default RE: Mopar stage 1 PCM?

i contacted mopar they said the stage 2 ecm with the mopar cam and exhaust dyno at 70 hp but they have no idea of hp gains with just the
ecm. I can tell you from my personl experience that I like the mopar stage 2 with my rc 05. I changed it out with 6000 on my truck and it raised the rev limiter to about 6200 and it feels like I have a lot more low end. But it could just be my gains were apparante because my stock ecm was holding my truck back for break in purposes until 8000 miles. I only paid 217.00 for my computer so not really a big investment.

[IMG]local://upfiles/31016/0B234462DA4145B7819FA8B5E6DDE040.jpg[/IMG]
 
Reply
Old Aug 6, 2006 | 05:21 PM
  #7  
Robertm235's Avatar
Robertm235
Thread Starter
Joined: Aug 2006
Posts: 13
Likes: 0
Default RE: Mopar stage 1 PCM?

any info on just the mopar stage 1 with k and n cold air?
 
Reply
Old Aug 6, 2006 | 06:08 PM
  #8  
Robertm235's Avatar
Robertm235
Thread Starter
Joined: Aug 2006
Posts: 13
Likes: 0
Default RE: Mopar stage 1 PCM?

Also how did you get in touch with Mopar, and where did you buy yours??
 
Reply
Old Aug 7, 2006 | 12:20 AM
  #9  
SilvrSRT10's Avatar
SilvrSRT10
Joined: May 2006
Posts: 5
Likes: 0
From:
Default RE: Mopar stage 1 PCM?

I found this info on mopartsracing.com

HIGH PERFORMANCE ENGINE CONTROLLERS
Plug in for the SRT10, Fuel and Spark are adjusted for use with the required performance camshaft (4510171) and exhaust headers (5153168) not recommended for SRT10 Quad cab

4510918 2004 Ram SRT10 Standard Trans
5153335 2005 Ram SRT10


This is from Mancini Racing

Get the same level of performance in your SRT-10 that Mopar Performance used to run the "One Lap of America" race! Take the Dodge RAM already potent Viper V10 to the next level. Combine the parts listed below for +70 horsepower gain!

MOPAR - Exhaust Headers SRT-10 MOPP4510844 $1,459.95

MOPAR - Air Induction System MOPP4510921 $679.95

MOPAR - Performance Camshaft MOPP4510171 $319.95

MOPAR - Performance Engine Controller MOPP4510918 $369.95


[IMG]local://upfiles/35596/B916B0B921874A9EAD1081C9F2E74933.jpg[/IMG]
 
Reply
Old Aug 7, 2006 | 12:45 AM
  #10  
mmmm_torque's Avatar
mmmm_torque
Professional
Joined: Dec 2004
Posts: 126
Likes: 0
From: Morrisville, NC
Default RE: Mopar stage 1 PCM?

Yup, thats why you purchase the Stage I or II from DC or X-Metal

Works better than the Mopar PCM.

 
Reply



All times are GMT -4. The time now is 07:23 PM.